2018 Summer Specials

Offers end August 31, 2018


$2,999   1-2 TON AIR CONDITIONING SYSTEMS

Air Conditioning Service and Repair - Southern NH, Nashua, Merrimack, Hudson
1 – Amana, ASX13, R-410a, Outdoor Condenser
1 – OEM, CAPF3, R-410a, Indoor Evaporator Coil
1 – 50’ Insulated Copper Lineset
1 – Hard Plastic Condenser Pad
1 – Condensation Pump and All Drain Lines
1 – Programmable Thermostat
1 – Electrical Disconnect Box
1 – Electrical Breaker
1 – Electrical Wire Whip
1 – 30 Minute Nitrogen Leak Test
1 – 350 Micron Evacuation
1 – Weighed-In Refrigerant Charge
1 – Start-Up, Testing, and Analysis
1 – Removal of existing system (as needed)

All labor as needed to completely install the system, all permits as required, all electrical done by a licensed electrician, all refrigeration done by EPA certified technicians

  • Must have existing forced air system (ductwork)
  • Must be 1.0 to 2.0 cooling tons to receive special pricing

$3,999   2-3 TON AIR CONDITIONING SYSTEMS

Outdoor Air Conditioning and Heat Pump Equipment

1 – Amana, ASX13, R-410a, Outdoor Condenser
1 – OEM, CAPF3, R-410a, Indoor Evaporator Coil
1 – 50’ Insulated Copper Lineset
1 – Hard Plastic Condenser Pad
1 – Condensation Pump and All Drain Lines
1 – Programmable Thermostat
1 – Electrical Disconnect Box
1 – Electrical Breaker
1 – Electrical Wire Whip
1 – 30 Minute Nitrogen Leak Test
1 – 350 Micron Evacuation
1 – Weighed-In Refrigerant Charge
1 – Start-Up, Testing, and Analysis
1 – Removal of existing system (as needed)

All labor as needed to completely install the system, all permits as required, all electrical done by a licensed electrician, all refrigeration done by EPA certified technicians

  • Must have existing forced air system (ductwork)
  • Must be 2.0 to 3.0 cooling tons to receive special pricing

$4,599   3-4 TON AIR CONDITIONING SYSTEMS

Outdoor Air Conditioning and Heat Pump Equipment

1 – Amana, ASX13, R-410a, Outdoor Condenser
1 – OEM, CAPF3, R-410a, Indoor Evaporator Coil
1 – 50’ Insulated Copper Lineset
1 – Hard Plastic Condenser Pad
1 – Condensation Pump and All Drain Lines
1 – Programmable Thermostat
1 – Electrical Disconnect Box
1 – Electrical Breaker
1 – Electrical Wire Whip
1 – 30 Minute Nitrogen Leak Test
1 – 350 Micron Evacuation
1 – Weighed-In Refrigerant Charge
1 – Start-Up, Testing, and Analysis
1 – Removal of existing system (as needed)

All labor as needed to completely install the system, all permits as required, all electrical done by a licensed electrician, all refrigeration done by EPA certified technicians

  • Must have existing forced air system (ductwork)
  • Must be 3.0 to 4.0 cooling tons to receive special pricing

$4,999   4-5 TON AIR CONDITIONING SYSTEMS

Outdoor Air Conditioning and Heat Pump Equipment

1 – Amana, ASX13, R-410a, Outdoor Condenser
1 – OEM, CAPF3, R-410a, Indoor Evaporator Coil
1 – 50’ Insulated Copper Lineset
1 – Hard Plastic Condenser Pad
1 – Condensation Pump and All Drain Lines
1 – Programmable Thermostat
1 – Electrical Disconnect Box
1 – Electrical Breaker
1 – Electrical Wire Whip
1 – 30 Minute Nitrogen Leak Test
1 – 350 Micron Evacuation
1 – Weighed-In Refrigerant Charge
1 – Start-Up, Testing, and Analysis
1 – Removal of existing system (as needed)

All labor as needed to completely install the system, all permits as required, all electrical done by a licensed electrician, all refrigeration done by EPA certified technicians

  • Must have existing forced air system (ductwork)
  • Must be 4.0 to 5.0 cooling tons to receive special pricing

$4,599   HIGH EFFICIENCY GAS FURNACES

picture showing Indoor Furnace Equipment

1 – Amana, AMEC96, Gas Furnace / AFUE 96%
4 – Furnace Stands (as needed)
1 – Return Drop (as needed)
1 – Supply Plenum (as needed)
1 – Condensation Pump and all Drain Lines
1 – Programmable Thermostat
1 – PVC Exhaust Vent Line
1 – PVC Intake Vent Line
1 – Gas Line Connection w/ Shut-Off Valve
1 – Start-Up, Testing, and Analysis
1 – Removal of existing system (as needed)

We wrap insulate all metal ductwork that we touch.

All labor and additional supplies as needed to completely install the system, all permits as required, all electrical done by a licensed electrician, all gas lines done by licensed NH Gas Fitters.

  • Must have existing forced air system (ductwork)
  • Must be less than 90,000 Btu’s, and 4.0 tons or less to receive special pricing

$7,999   BOTH SYSTEMS

Quality Craftmanship

1 – Amana, ASX13, R-410a, Outdoor Condenser
1 – OEM, CAPF3, R-410a, Indoor Evaporator Coil
1 – Amana, AMEC96, Gas Furnace / AFUE 96%
4 – Furnace Stands (as needed)
1 – Return Drop (as needed)
1 – Supply Plenum (as needed)
1 – PVC Exhaust Vent Line
1 – PVC Intake Vent Line
1 – Gas Line Connection w/ Shut-Off Valve
1 – 50’ Insulated Copper Lineset
1 – Hard Plastic Condenser Pad
1 – Condensation Pump and All Drain Lines
1 – Programmable Thermostat
1 – Electrical Disconnect Box
1 – Electrical Breaker
1 – Electrical Wire Whip
1 – 30 Minute Nitrogen Leak Test
1 – 350 Micron Evacuation
1 – Weighed-In Refrigerant Charge
1 – Start-Up, Testing, and Analysis
1 – Removal of existing system (as needed)

We wrap insulate all metal ductwork that we touch.

All labor as needed to completely install the system, all permits as required, all electrical done by a licensed electrician, all refrigeration done by EPA certified technicians, all gas lines done by licensed NH Gas Fitters.

  • Must have existing forced air system (ductwork)
  • Must be 3.0 cooling tons or less to receive special pricing
  • Must be less than 90,000 Btu’s, and 4.0 tons or less to receive special pricing